 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA 9-Bit TTL/ECL Translator The MC10H/100H600 is a 9-bit, dual supply TTL to ECL translator. Devices in the Motorola 9-bit translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical performance. The H600 features both ECL and TTL logic enable controls for maximum flexibility. The 10H version is compatible with MECL 10H ECL logic levels. The 100H version is compatible with 100K levels. * * * * * * * * 9-Bit Ideal for Byte-Parity Applications Flow-Through Configuration Extra TTL and ECL Power/Ground Pins to Minimize Switching Noise ECL and TTL Enable Inputs Dual Supply 3.5 ns Max D to Q PNP TTL Inputs for Low Loading Choice of ECL Compatibility: MECL 10H (10Hxxx) or 100K (100Hxxx) MC10H600 MC100H600 FN SUFFIX PLASTIC PACKAGE CASE 776-02 PIN NAMES PIN GND VCCE VCCO VCCT VEE D0 - D8 Q0 - Q8 ENECL ENTTL FUNCTION TTL Ground (0 V) ECL VCC (0 V) ECL VCC (0 V) -- Outputs TTL Supply (+ 5.0 V) ECL Supply (- 5.2 / - 4.5 V) Data Inputs (TTL) Data Outputs (ECL) Enable Control (ECL) Enable Control (TTL) LOGIC SYMBOL ENECL ENTTL D0 D1 D2 D3 TTL D4 D5 D6 D7 D8 Q0 Q1 Q2 Q3 Q4 Q5 Q6 ECL TRUTH TABLE ENECL H H X X L ENTTL X X H H L D H L H L X Q H L H L L Pinout: 28-Lead PLCC (Top View) D5 D4 VCCT D3 D2 D1 D0 25 24 23 22 21 20 19 18 17 16 15 2 3 4 5 6 7 8 9 10 11 14 13 12 D6 26 27 28 Q0 Q1 VCCE VCCO Q2 VCCO Q3 Q7 Q8 D7 D8 GND ENTTL NC ENECL Q8 Q7 VCCO Q6 VEE Q5 Q4 3/93 (c) Motorola, Inc. 1996 2-140 REV 5 MC10H600 MC100H600 DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% (10H version); VEE = - 4.2 V to - 5.5 V (100H version) 0C Symbol S bl Parameter P Power Supply Current IEE ICCH ICCL ECL TTL 10H 100H -125 -122 48 50 -125 -123 48 50 -125 -132 48 50 mA mA Min Max Min 25C Max Min 75C Max Unit Ui Condition C di i AC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% (10H version); VEE = - 4.2 V to - 5.5 V (100H version) 0C S bl Symbol tPLH tPHL P Parameter Propagation Delay to O tp t Output D ENECL / ENTTL Min 1.4 1.8 0.5 Max 3.0 3.7 1.5 Min 1.5 1.9 0.5 25C Max 3.2 3.9 1.5 Min 1.7 2.0 0.5 75C Max 3.5 4.1 1.5 Ui Unit ns ns ns C di i Condition 50 to - 2.0 V 50 to - 2.0 V 50 to - 2.0 V tR tF Output Rise/Fall Time 20% - 80% 10H ECL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% 0C Symbol S bl IIH IIL VIH VIL VOH VOL Parameter P Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage Output HIGH Voltage Output LOW Voltage Min 0.5 -1170 -1950 -1020 -1950 - 840 -1480 - 840 -1630 Max 225 0.5 -1130 -1950 - 980 -1950 - 810 -1480 - 810 -1630 Min 25C Max 145 0.5 -1070 -1950 - 920 -1950 - 735 -1450 - 735 -1600 Min 75C Max 145 Unit Ui A A mV mV 50 to - 2.0 V Condition C di i 100H ECL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 4.2 V to - 5.5 V 0C Symbol S bl IIH IIL VIH VIL VOH VOL Parameter P Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage Output HIGH Voltage Output LOW Voltage Min 0.5 -1165 -1810 -1025 -1810 - 880 -1475 - 880 -1620 Max 225 0.5 -1165 -1810 -1025 -1810 - 880 -1475 - 880 -1620 Min 25C Max 145 0.5 -1165 -1810 -1025 -1810 - 880 -1475 - 880 -1620 Min 75C Max 145 Unit Ui A A mV mV 50 to - 2.0 V Condition C di i TTL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% (10H version); VEE = - 4.2 V to - 5.5 V (100H version) 0C Symbol S bl VIH VIL IIH IIL VIK Parameter P Input HIGH Voltage Input LOW Voltage Input HIGH Current Input LOW Current Input Clamp Voltage Min 2.0 0.8 20 100 - 0.6 -1.2 Max Min 2.0 0.8 20 100 - 0.6 -1.2 25C Max Min 2.0 0.8 20 100 - 0.6 -1.2 75C Max Unit Ui V V A mA V VIN = 2.7 V VIN = 7.0 V VIN = 0.5 V IIN = -18 mA Condition C di i MECL Data DL122 -- Rev 6 2-141 MOTOROLA MC10H600 MC100H600 OUTLINE DIMENSIONS FN SUFFIX PLASTIC PLCC PACKAGE CASE 776-02 ISSUE D B -N- Y BRK U D Z -L- -M- 0.007 (0.180) M 0.007 (0.180) M T L-M S N S S T L-M N S W 28 1 D X VIEW D-D G1 0.010 (0.250) S T L-M S N S V A Z R C 0.007 (0.180) 0.007 (0.180) M T L-M T L-M S N N S H 0.007 (0.180) M T L-M S N S M S S E 0.004 (0.100) G G1 0.010 (0.250) S K1 J -T- VIEW S SEATING PLANE K F VIEW S 0.007 (0.180) M T L-M S N S T L-M S N S NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635). DIM A B C E F G H J K R U V W X Y Z G1 K1 INCHES MIN MAX 0.485 0.495 0.485 0.495 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 --- 0.025 --- 0.450 0.456 0.450 0.456 0.042 0.048 0.042 0.048 0.042 0.056 --- 0.020 2_ 10_ 0.410 0.430 0.040 --- MILLIMETERS MIN MAX 12.32 12.57 12.32 12.57 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 --- 0.64 --- 11.43 11.58 11.43 11.58 1.07 1.21 1.07 1.21 1.07 1.42 --- 0.50 2_ 10_ 10.42 10.92 1.02 --- MOTOROLA 2-142 MECL Data DL122 -- Rev 6 MC10H600 MC100H600 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 MECL Data DL122 -- Rev 6 2-143 *AMC10H600/D* AMC10H600/D MOTOROLA |
Price & Availability of MC100H600
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |